background image

Customer service and spare parts

If you cannot find the remedy for a malfunction in
these operating instructions, please contact your
dealer or our customer service department and
consult the Guarantee card.

Selective ordering of replacement parts can save
unnecessary travel and costs.

For this reason always provide the following appliance
information:

Model Name

Model Number (PNC)

Serial Number (S-No.)

This information can be found on the rating plate
inside the cabenit on the left hand wall. We
recommend that you enter this information here, so
that it is handy if needed.

Technical specifications

The technical data is indicated in the rating plate on
the left side inside the appliance.

Door reversibility

The equipment is supplied with the door

opening toward the right.

Follow the instructions below before installing it
to have the door open to the left.

1. Unscrew the top hinge screw and remove the

spacer.

2. Remove the door.

3. Unscrew with a key the lower pin and replace it on

the opposite side.

4. Reinsert the door and screw the upper hinge and

spacer onto the opposite side.

22

GB

Summary of Contents for IKE 160-2T














Reviews: