24
PR266
A
B
C
D
7. Separate parts A, B, C, D as shown in the figure.
20mm
A
50mm
PR166
8. Place guide (A) on the inside part of the furniture
door, up and down as shown in the figure and mark
the position of external holes. After having drilled
holes, fix the guide with the screws supplied.
P R 3 3 / 2
C
A
9. Fix cover (C) on guide (A) until it clips into place.
11. Should the lining up of the furniture door be
necessary, use the clearance of slots.
At the end of operations, it is necessary to check
if the door of the furniture closes properly.
8mm
PR167
A
B
10. Open the appliance door and the furniture door at
90°. Insert the small square (B) into guide (A). Put
together the appliance door and the furniture door
and mark the holes as indicated in the figure.
Remove the squares and drill holes with Ø 2 mm
at 8 mm from the outer edge of the door. Place
the small square on the guide again and fix it with
the screws supplied.
PR168
PR167/1
D
B
12. Fix cover (D) on guide (B) until it clips into place.