23
t
Instructions for totally built-in
appliances
Dimensions of the recess
Height of housing
mm 880
Depth of housing
mm 550
Width of housing
mm 560
1. For safety reasons, minimum ventilation must be
as shown in Fig.
Attention: keep ventilation openings clear of
obstruction.
D765
A
D022
2. Apply joint the sealing strip as shown in figure.
3. Slide the appliance into the recess, pushing it
against the wall on the handle side.
D727
C
D
4. Open the door and push the appliance against the
side of the kitchen unit opposite to that of ap-
pliance hinges. Fasten the appliance with 4 screws
provided in the kit included with the appliance.
Snap vent grille (C) and hinge cover (D) into
position.
D265
A
D013
B
B
5. If after having carried out the previously described
operation there is still some space between the
appliance and the kitchen unit, fit the trimming
provided together with the appliance on the stop
strip (A).
6. Apply covers (B) on joint cover lugs and into hinge
holes.
