12
EWI 457.0
Safety instructions
■
Installation, repairing and servicing the appliance are jobs that should be
left to a qualified electrician according to valid safety regulations. For your
own safety, do not allow anyone other than a qualified service technician to
install, service or repair this appliance.
■
The supply connecting line is mounted in accordance with mounting type Y.
This means that this connection cable
must under no circumstances be
repaired or replaced by a commercially available connection cable
. In
case of a failure, the connection cable must be replaced by a Küppersbusch
service technician in order to exclude any safety risk.
■
Persons with cardiac pacemakers or implanted insulin pumps must make sure
that their implants are not affected by the induction field (the frequency range
of the induction field is 25-50 kHz).
■
The induction cooking zone may only be used with an accurately fitting wok
pan which is suitable for an induction hob (see right column). Other objects
like for example not suitable wok pans or even pots can be damaged as
these can heat up unevenly and by this it could happen that the content
can overheat or start to burn.
■
When cooking, pay attention to the heat-up speed of the cooking zones.
Avoiding boiling the wok dry as there is a risk of the overheating!
■
Do not place the empty wok in the operating hob.
■
Immediately switch off the cooking zone after using with the respective
minus key and not just by pot recognition.
■
Owing to the very fast reaction at the induction hob, do not use the
induction hob without supervision!
■
Overheated fats and oils may spontaneously ignite. Prepare meals with
greases and oils only under control. Take car when deep-fat frying!
Never extinguish ignited fats and oils with water as the water
evaporates in an explosion!
Put the lid on the pan and switch off the
cooking zone.
■
The glass ceramic hob is extremely robust. Avoid dropping hard objects onto
the glass ceramic hob. Pointed objects falling onto your hob might break it.
■
If cracks, fractures or any other defects appear in your glass ceramic hob,
immediately switch off the appliance. Disconnect fuse immediately and call
the Customer service.
■
If the hob cannot be switched off due to a defect in the sensor control
immediately disconnect your appliance and call the Customer service.
■
The glass ceramic hob should not be used as a storage area.
■
Do not put kitchen foil or plastic onto the cooking zone.
■
Metal objects, e.g. kitchen utensils, cutlery, must not be left on the surface
of the induction hob as they can become hot.
■
Take care with metal objects which are worn on the body if they come into
the direct vicinity of the induction hob as they can become hot. Non-
magnetisable objects (e.g. gold or silver rings) are not affected.
■
Do not heat any unopened food cans or laminated packing on the hob.
There is a risk of bursting!
■
Be especially careful to keep the sensor keys clean since soiling could be
mistaken for finger contact by the appliance. Never put anything (wok, tea
towels etc.) onto the sensor keys!
If food boils over onto the sensor keys, we advise you to activate the OFF
switch.
■
Hot pans should not cover the sensor keys, otherwise the appliance
switches itself off automatically. In this case the oven automatically shuts
off.
■
If there are any pets in the apartment which could come near the hob,
activate the child-proof lock.
■
Do not place magnetorsensitive objects on the cooker (e.g. electronic
devices, credit cards, discs).
Your appliance at a glance
1
Symbol for the induction wok
2
Control panel
The operation panel
1
Sensor key ON (stand-by switch) / OFF
2
Sensor key for lock of the control panel (child proof lock)
3
Plus and minus keys (Preselection pads for cooking settings)
4
LED display Sensor-lock (child-proof lock)
5
Indicator for cooking setting
