24
Dimensions
Hob Height/ Width/ Depth
mm
52 x 600* x 510
Installation dimensions
Width/ Depth
mm
560 x 490
Cooking zones
Back left
Ø cm / kW
18 / max. 2.8
Front left
Ø cm / kW
18 / max. 2.8
Front right
Ø cm / kW
16 / max. 2.0
Back rights
Ø cm / kW
21 / max. 3.1
Electrical connection
Mains voltage
400-415V 2N~, 50-60 Hz
Component rated voltage
230 - 240V
Hob, total
kW
5.9
Electrical connection
• The electrical connection must be carried out by a qualified
electrician who is authorised to carry out such work!
• Statutory regulations and the connection specifications issued by the
local power supply company must be strictly observed.
• When connecting the appliance it must be ensured that there is a device
which makes it possible to disconnect it from the mains at all poles
with a contact opening width of at least 3mm. Line-protecting switches,
fuses or contactors are suitable cut-out devices.
• When connecting and repairing the appliance disconnect it from the
electricity supply with one of these devices.
• Ensure that all live connections are safely insulated when installing
the oven.
• The earth wire must be so long that if the strain relief fails, the live
wires of the connecting cable are subjected to tension before the earth
wire.
• Any superfluous cable must be removed from the installation area
beneath the appliance.
• The induction hob has been fitted with a temperature-resistant
connection cable in the factory.
• Connection to the mains is carried out in accordance with the circuit
diagram, unless the connection cable is already fitted with a plug.
• If damaged, the manufacturer or his customer service must replace
the connection cable installed with a special connection cable.
Attention!
Incorrect connection may result in the power electronics unit being
destroyed.
Start of operation
Once the hob has been installed and the power supply has been provided
(mains connected) an automatic test of the controls will be carried out
and information for customer service will be indicated.
This indication will go off after 30 seconds or as soon as a key has been
pressed.
Briefly wipe over the surface of the hob with a sponge and soapy water
and then dry with a clean cloth.
*Stainless steel frame 580 mm
Technical data
