21
INSTALLATION
Keep the wine cellar in vertical position 24H before setting up
Setting instructions
Remove exterior and interior packing. Use a dry and non abrasive damp to clean
lightly the exterior parts of the appliance. Use a non abrasive and wet damp to clean
the interior parts.
In order to get the most out of your wine cellar while keeping energy consumption to
the lowest, do not place your appliance near a heat source, in direct sunlight or in a
room too cold. Optimal performance is obtained at temperatures between + 16°C
and + 32°C.
For the free standing hinge products and without front ventilation, a space of 70 mm
must be left between the wall and the rear of the appliance. This must be left
unobstructed to allow air to circulate otherwise the appliance will not work correctly.
The appliance must be kept in a level upright horizontal position to avoid possible
vibrations or noises.
The air must circulate freely in front of the product.
Any breakdown resulting of the non respect of use instructions engages only the
user’s responsibility.
