25
TEMPERATURE SETTING
Switching
Operation
On / Off
indicator
Switching the light
Temperature indicator Temperature indicator Temperature setting
On / Off
upper compartment
lower compartment
Setting the Temperature Control
You can set the temperature as you desire by pushing the “
“or „
“button.
When you push the two buttons for the first time, the LED readout will show the
original temperature set at previous time.
The temperature preset at the factory are
:
Upper compartment
:
:
7°c
Lower compartment:
12°C
The temperature that you desire to set will increase 1ºC if you push the button once,
on the contrary the temperature will decrease 1ºC if you push the button once.
Upper compartment
: The temperature setting can be adjusted from 5°C to 10°C.
Lower compartment:
The temperature setting can be adjusted from 10°C to 18°C
To view the “set” temperature. (anytime) press and hold the corresponding button for
approximately 5 seconds, the “set” temperature will temporarily “flash” in the LED
display for 5 seconds.
NOTE
:
To optimize the functioning, it is important to respect a setting
difference about 4°C between upper and lower compartment (8°C and 12°C for
example).
NOTE:
The fans works on very often to make homogeneous the temperature inside
the cellar.
The fan to cool the condenser is located down behind the appliance.
So the low noise you can hear is normal.
