18
H5-60-85-01
For internal use only
Remove the control board of the control box (fig. 22).
Disconnect the connector from the control board (fig. 23).
Replace the control board of the control panel.
Re-insert in reverse order.
Re-position the control box in the aperture in the aluminium
front trim.
Fit the switch block as indicated on page 14.
Switch on the electricity supply to the hood.
Check the different functions of the controls.
6.8
Replacing the halogen lights
Disconnect the hood as indicated on page 12.
Remove the 2 screws on each side of the glass diffuser (fig. 24) and then remove the diffuser (fig. 25).
To ensure the hood functions safely, replace the halogen tube with an identical tube (230V 60W), and
then mount the diffuser again.
Switch on the electricity supply to the hood.
Check to ensure that the halogen light is working.
Fig. 22
Fig. 23
Fig. 24
Fig. 25
Summary of Contents for KD 12450.0
Page 1: ... c QLMHFH c IJLMHFH ...
