10
H5-60-85-01
For internal use only
5.
Charcoal filters
When the cooker has been in operation for 400 hours, LED 1 will blink twice briefly to indicate that the
charcoal filter needs to be replaced.
5.1
Resetting the charcoal filter indicator
The motor and the lamp must be switched off. Press the 4 (+) switch for approximately 10 seconds.
All 5 LEDs blinking twice indicates function = ON
All 5 LEDs blinking once indicates function = OFF
5.2
Removing the grease filter of the KD 12450 and KD 9450
The charcoal filter (ZUB 613) does not fit into these cooker hoods. Instead the charcoal filter (ZUB 870)
and a U-shaped supporting frame for the charcoal filter needs to be used for both cooker hoods.
Additional reinforcement is required for cooker hoods produced prior to October 2002.
The following spare parts are required:
U-shaped support frame
Spare-part no. 56 55 18
Charcoal filter ZUB 870
Spare-part no. 56 45 11
Additional reinforcement for hoods produced prior to October 2002
KD 9450.0 Stainless steel reinforcement Spare-part no. 56 55 16
KD 12450.0 Stainless steel reinforcement Spare-part no. 5655 17
U-shaped
Support frame
Stainless steel
Charcoal filter
Details on attachment
KD 12450
Details on attachment
KD 12450
Reinforcement
Summary of Contents for KD 12450.0
Page 1: ... c QLMHFH c IJLMHFH ...
