Service Manual
9
For internal use only
5.
Buttons and functions
The extractor hood is equipped with a fully automatic system for administrating all of the available
functions (Advanced Sensor Control). The air in the kitchen stays pleasant and fresh without requiring
any manual controls. The sensitive sensors detect any type of steam, vapours, odours and GAS and
automatically adjust the hood to the required fan power.
5.1
Buttons
Button A
Switch off the lighting.
Button B
Switch on the lighting.
Button C
Reduce the motor speed to zero. The hour metre is set at zero if pressed for 2 sec.
when the filter alarm has gone off.
Button D
Activate the motor (by calling up the last speed set) and drive up the speed until the top
speed is reached.
Button E
Activate/deactivate the sensor (AUTOMATIC or MANUAL operation mode). The sensor
is activated in the automatic operation mode and the letter “A” will appear on the
display (L).
Button L
Display:
•
indicates the current speed.
•
indicates the automatic operation mode; the letter "A" is shown. When the motor
speed is changed, the current speed is shown when the light comes on 3 times; the
letter "A" will then appear again.
•
indicates "filter alarm" (when the motor is switched off) by showing 30s in the middle
segment.
