14
Service Manual
For internal use only
8.
Removing the electrical components
The hood must be disconnected from the mains power supply before it is cleaned or
before any maintenance work is carried out.
To make it easier to access the inside of the hood, the bottom part may be removed as described
in 7.1.
8.1
Electrical unit casing
1.
Remove all 4 casing screws (D).
8.2
Power supply casing
1.
Remove the power supply casing screw (E).
8.3
Transformer
1.
Remove the transformer fastening screw (F).
2.
Remove the cover of the transformer by screwing out the two
screws (G); this will give you access to another screw which
fastens the transformer and also needs to be screwed out.
3.
Disconnect the electrical connections and remove the
transformer.
D
E
G
F
