background image

14

EKEW 847

Safety instructions

Connection and operation

Fitting a mains socket, repairing and servicing the appliance are jobs that 
should be left to a qualified electrician according to valid safety regulations. 
For your own safety, do not allow anyone other than a qualified service 
technician to install, service or repair this appliance.

The surfaces of the heating and cooking zones become hot during use. 
Therefore be careful: Always make sure that children are kept well away!

For the hob

Overheated fats and oils may spontaneously ignite. Food involving the use 
of fats and oils, e.g. chips, may only be cooked under supervision. Never 
extinguish ignited fats and oils with water! Put the lid on, turn off the 
cooking zone and remove the pan.

If cracks, fractures or any other defects appear in your glass ceramic hob, 
immediately switch off the appliance. Disconnect fuse immediately and call 
the Customer service.

If the hob cannot be switched off due to a defect in the sensor control 
immediately disconnect your appliance and call the Customer service.

Take care when working with attachments! The connecting cable must not 
contact the hot cooking zones.

The glass ceramic hob should not be used as a storage area.

Do not place combustible or ignitable objects on the cooking area which 
might be dangerous if the appliance is switched on unintentionally.

Do not place combustible, volatile or heat deformable objects directly 
underneath the hob.

Do not switch the cooking zones on if not using them for cooking. Never 
use the appliance to heat a room! This would result in improper operating 
conditions.

Do not put kitchen foil or plastic onto the cooking zones. Keep everything 
which could melt, such as plastics, foil and in particular sugar and sugary 
foods away from the hot cooking zone. Remove sugar immediately from the 
hob when it is still hot with a scraper to avoid damage

Avoid repeated burning of food residues and boiling over.

Lime deposits are harmful to the cooking zone.

If there are any pets in the apartment which could come near the hob, 
activate the childproof lock.

Never clean the glass ceramic hob with a steam cleaner or similar 
appliance!

Before using the appliance for 
the first time

Remove packaging and non-essential components. Before preparing the first 
meals clean the glass ceramic hob by means of a moist cloth and a bit 
washing-up liquid.

The hob is resistant against thermal shocks (coldness and heat) and also very 
robust.

Always ensure that no hard objects are dropped onto the cooking surface. 
Pointed objects falling onto your hob might break it.

Please observe the cleaning and servicing instructions. Be especially careful 
to keep the sensor keys clean since soiling could be mistaken for finger 
contact by the appliance. Never put anything (pans, tea towels etc.) onto 
the sensor keys! If food boils over onto the sensor keys, we advise you to 
activate the emergency switch.

When switching on the cooking zones a short buzzing noise may be heard 
from the heating. This is design-specific and has no influence on quality 
and operation.

Hot pots and pans should not cover the lines outlining the sensors. In this 
case the appliance may automatically shut off.

Using the cooking zones

Please note the safety instructions!

Subsequent to initial connection and after a power failure “

CAL

” will appear 

briefly in the LED displays. Rotating, circling symbols will then be indicated. 
This means that the sensors have been checked automatically and that the 
touch sensitivity has also been newly set. 

Confirm this indication by touching the „off“ sensor. These symbols will be 
switched off immediately if there are no objects on the sensors. Otherwise 
remove any objects and disconnect the cooking zone briefly from the mains 
(fuse) once again.

Important!

No objects must be lying on top of the sensors when adjusting the sensor’s 
sensitivity. 

Using the wok cooking zone

Cooking in the glass ceramic wok cavity

When cooking food in the wok cavity never use tools which could scratch 
the glass ceramic surface.

The wok cavity should not be used for very sugary foodstuffs. High 
temperatures cause the sugar to melt into the glass ceramic surface and 
can damage it permanently. When cooking such foodstuffs it is essential 
that the wok pan supplied be used.

The wok hob transmits heat directly to the food. Cooking directly in the wok 
cavity on the glass ceramic surface enables a highly economical use of 
cooking fats. Gentle, low-fat cooking preserves vital vitamins and minerals. 

– Pre-heat the wok cavity for 5-7 minutes with the lid (of the wok pan) so 

that the heat is distributed better and more evenly.

– Always pre-heat with the setting that will subsequently be used for cooking.

All manuals and user guides at all-guides.com

Summary of Contents for EKEW 847











Reviews: