EEB 6600.0
35
What to do if trouble occurs...
[
Repairs may only be carried out by a qualified technician!
You can deal with some problems that occur yourself. First check whether
there has been any operating error. Repairs during the guarantee period are
not free of charge, when they are caused by operating errors or non-
observance of the following instructions:
Replacing a halogen lamp
[
Attention!
The halogen lamps become very hot after being in use for
some time. Therefore, the lamps should be changed when they have
cooled down.
[
Only replace the halogen lamps with lamps of the same type. You can
obtain new halogen lamps from KÜPPERSBUSCH customer service.
F
Do not grip the halogen lamps with your bare hands. Finger marks burn
into the lamp glass and reduce the light intensity and service life of the
lamps.
Changing the halogen lamp:
– Unscrew the shelf rack.
– Carefully lever out the glass
cover with a screwdriver.
– Remove the halogen bulb from
its socket.
– Hold the new bulb
with a cloth
(e.g. tissue)
and push it into the socket.
– Reinstall the glass cover.
– Screw the shelf rack on again.
Replacing the door sealing
[
Do not use the oven with damaged or missing door sealing!
If the sealing is damaged or cannot be cleaned anymore it has to be replaced.
You can obtain a new sealing from KÜPPERSBUSCH customer service.
Removing the sealing
– To remove the sealing gently pull
each corner out.
Fitting the new sealing
– Clasp one corner after the other into
the oven front.
Take care not to deform the hooks!
Rating label
Always indicate the data provided on
the rating label when calling in
customer service or ordering spare
parts.
The rating label for the oven is located
on the right-hand side strip and is
visible when the oven door is open.
– Make a note of this information in case you have to consult our customer
service.
Fault
Cause
Remedy
Not possible to switch off
the oven.
Electronic component
defective.
Disconnect fuse, call
customer service.
Oven does not heat up.
Fuse defective.
Check and replace fuse, if
necessary.
Is the mains plug in the
wall socket?
Plug the mains plug into the
wall socket
Oven temperature control
or mode selector has not
been switched on.
Set oven temperature control
or mode selector as required.
Electronic timer flashing
– the clock has not yet
been set.
Set the clock. See page 23.
Oven light no longer
works.
Lighting defective.
Change the bulb.
Glass of oven door
broken.
Switch off the appliance,
call customer service.
Door sealing damaged.
Replace the door sealing.
Strong smells from oven
in spite of ökotherm
®
catalyst.
ökotherm
®
catalyst must
be regenerated.
See page 34 ”Regenerating
the ökotherm
®
catalyst”.
Strong vinegar smell
when preparing.
Baking with sour dough
or with yeast, food
containing alcohol and
using a fan-assisted
mode.
Use a mode without fan-
assistance, e.g., top heat/
bottom heat.
Fruit juice or protein
stains on enamelled
parts.
Moist cake or meat
juices.
Harmless changes in the
enamel, cannot be remedied.
Display of the roasting
thermometer indicates
”-- °C” or ”95 °C”
(flashing).
Temperature is outside
the display range.
See page 31 ”Using the
roasting thermometer”.
”Err I” appears in the
display.
Roasting thermometer
defective.
Substitute roasting
thermometer. Only use
original roasting
thermometer, available at
Customer service!
You can use the oven without
the core temperature feature.
Socket defective.
Have the socket checked out.
Production-no. oven
Model designation oven