26
Service Manual
For internal use only
•
Disconnect the wires of the neon tube holder to be replaced, by
using a suitable tool.
•
Push the tongues placed in the upper side of the neon tube
holder and remove the component by moving it downwards.
8.4
Replace the ballast.
•
Disconnect the ballast wires by using a screwdriver and pushing
on the side shown in the figure.
•
Remove the fixing screws and replace the ballast with a new
one.
8.5
Replace the main electrical system board.
See “Replace the electrical system board” on page 10.
8.6
Replace the Touch control.
See “Replace the push-button panel.” on page 23.
