Kuppersberg WM 1477, Technical Passport

Page: 8 / 56

8
TECHNICAL PASSPORT ENGLISH
Washing Machines

Mount the furniture door to the
front of the washer using the hinges.
Place the spacers under the hinges (I)
and then fi x in position with screw (H).
We suggest mounting the furniture
door so that it opens towards the left,
which is the same direction as the
porthole door. This will leave more
space when you are loading washing
into the appliance.

Slide the washer into an opening
of the size indicated in the diagram
opposite. A furniture plinth may be run
across the front of the appliance, but
its height will be dictated by the height
the washer is set at.

The 4 adjustable feet allow the
height of the washer to be adjusted
from 820 mm to a maximum of 840
mm. To adjust the height, you should
remove the nuts fi tted to each foot
and replace these with the 5 mm nuts
supplied. Raise the feet to your desired
height and then fully tighten the lock
nut to the base of the washer.