Kuppersberg WM 1477, Technical Passport

Page: 15 / 56

15
ENGLISH TECHNICAL PASSPORT
Washing Machines
display). The pre-set delay increases by
1 hour each time the button is pressed,
until h24 appears on the display, at
which point pressing the button again
will reset the delay start to zero.

Confi rm by pressing the
START/PAUSE button. The delay
countdown will begin and when it
has fi nished the programme will start
automatically.

It is possible to cancel the delay
start by turning the programme selector
to OFF.
If there is any break in the power supply
while the machine is operating, a special
memory stores the selected programme
and, when the power is restored, it
continues where it left OFF.
The option buttons should be selected
before pressing the START/PAUSE
button.
OPTIONS button
This button allows you to choose
between three different options:
- EXTRA RINSE

This option allows you to add
one rinse at the end of the washing
cycle and is useful for people with
delicate and sensitive skin, for which a
small amount of detergent residue can
cause irritations or allergies.

It is advisable to also use this
function for the children clothes and
for the washing of heavily soiled items,
which requires a lot of detergent to be
used, or for the washing of toweling
items whose fi bres mostly have the
tendency to hold the detergent.
- H
Activated when you set 60°C of
temperature. This option allows deep
cleaning of your clothes by maintaining
the same temperature for the whole
wash.
- EASY IRON
This function allows you to
minimizes creases as much as possible,
eliminating the intermediate spins or
reducing the intensity of the last one.
If an option is selected that is
not compatible with the selected
programme then the option indicator
light fi rst fl ashes and then goes off.
RAPID / STAIN LEVEL button
This button allows you to choose
between two different options,
depending on the selected programme.
- RAPID
The button becomes active when
you select the RAPID (14/30/44 Min.)
programme on the knob and allows
you to select one of three durations
indicated.
- STAIN LEVEL button

Once the programme has been
selected the wash time set for that
programme will be automatically
shown.

This option allows you to choose
between 3 levels of wash intensity
modifying the length of the programme,