Kuppersberg WM 1477, Technical Passport

Page: 16 / 56

16
TECHNICAL PASSPORT ENGLISH
Washing Machines
depending on how much the fabrics
are soiled (can only be used on some
programmes as shown in the table of
programmes).
TEMPERATURE SELECTION
button

This button allows you to change
the temperature of the wash cycles.

It is not possible to raise the
temperature over the maximum allowed
for the programme, in order to protect
the fabrics.

If you want carry out a cold wash
all the indicators must be off.
SPIN SPEED button

By pressing this button, it is
possible to reduce the maximum speed,
and if you wish, the spin cycle can be
cancelled.

If the label does not indicate
specifi c information, it is possible to
use the maximum spin expected in the
program.
To prevent damage to the fabrics, it
is not possible to increase the speed
over the maximum allowed for the
programme.

To reactivate the spin cycle press
the button until you reach the spin
speed you would like to set.

It is possible to modify the spin
speed without pausing the machine.
KEY LOCK

Pressing simultaneously the
buttons TEMPERATURE SELECTION
and SPIN SPEED for about 3 seconds,
the machine allows you to lock the
keys. In this way, you can avoid making
accidental or unwanted changes if
a button on the display is pressed
accidently during a cycle.

The key lock can be simply
cancelled by pressing the two buttons
simultaneously again or turning off the
appliance.
Digital Display
The display’s indicator system allows
you to be constantly informed about the
status of the machine.
1) OPTIONS INDICATOR LIGHTS
The indicator lights show the
options that can be selected by the
relevant button.
2) CYCLE DURATION

When a programme is selected
the display automatically shows
the cycle duration, which can vary,
depending on the options selected.

During the initial fi lling phase
of the cycle the machine calculates the
actual cycle time needed based on the
load size, content and options selected.
The real time of the wash will then be
displayed. This time can recaulculate