Kuppersberg NRV 1867 DX, Technical Passport

Page: 47 / 84

47
ENGLISH TECHNICAL PASSPORT
Fridge - Freezer
8. TIPS FOR SAVING ENERGY
1. Install the appliance in a cool,
wellventilated room, but not in direct
sunlight and not near a heat source (such as
a radiator or oven) otherwise an insulating
plate should be used.
2. Allow warm food and drinks to cool
before placing them inside the appliance.
3. Place thawing food in the refrigerator
compartment if available. The low
temperature of the frozen food will help
cool the refrigerator compartment while the
food is thawing. This will save energy. Frozen
food left to thaw outside of the appliance
will result in a waste of energy.
4. Drinks or other liquids should be
covered when inside the appliance. If left
uncovered, the humidity inside the appliance
will increase, therefore the appliance uses
more energy. Keeping drinks and other
liquids covered helps preserve their smell
and taste.
5. Avoid keeping the doors open for
long periods and opening the doors too
frequently as warm air will enter the
appliance and cause the compressor to
switch on unnecessarily often.
6. Keep the covers of the different
temperature compartments (such as the
crisper and chiller if available) closed.
7. The door gasket must be clean and
pliable. In case of wear, replace the gasket.