7
ENGLISH
TECHNICAL PASSPORT
Dishwasher
Dishwasher Features
Front View
1 Upper Basket
2 Spray Arms
3 Lower Basket
4 Water Softener
5 Filters
6 Detergent Dispenser
7 Rinse Aid Dispenser
8 Cutlery basket
9 Floor Light
4. PRIOR USING
FOR THE FIRST TIME
Before using your dishwasher
for the fi rst time:
A. Set the water softener
B. Loading the salt into the softener
C. Fill the rinse aid dispenser
D. Fill in detergent
А. Set the Water Softener
The water softener is designed to
remove minerals and salts from the
water, which would have a detrimental
or adverse effect on the operation of
the appliance. The higher the content
of these minerals and salts, the harder
the water is. The softener should be
adjusted according to the hardness
of the water in your area. Your local \
Afeiter Authority can advise you on the
hardness of the water in your area.
Setting
The amount of salt dispensed can be
set from HO to H7.
Salt is not required at the set value
HO.
1. Find out about the hardness value
of your tap water. Your water utility
company will help you with this.
2. Set value can be found in the water
hardness table.
3. Close the door.
4. Switch on «Power» switch.
5. Hold down « Delay» button and
then press «Program» button for
5 seconds.The buzzer rings one
time and H.. fl ashes on the digital
display.(factory setting is H4)
To change the setting:
1. Press « Delay « button. Each time
the button is pressed, the set value
increasesby one level;when the
value of H7 has been reached, the
display jumps back to HO(off).
2. Press « Program « button. The
chosen setting has now been stored.
Contact your local water board for
infor mation on the hardness of your
water supply.
9
