79
ENGLISH
TECHNICAL PASSPORT
Dishwasher
STARTING A CYCLE WASH
1.
Draw out the lower and upper basket, load the dishes and push them back. It is
commended to load the lower basket first, then the upper one.
2.
Pour in the detergent.
3.
Insert the plug into the socket. The power supply refer to last page «Product
fiche». Make sure that the water supply is turned on to full pressure.
4.
Close the door, press the Power button, to switch on the machine.
5.
Choose a program, the response light will turn on. Then press the Start/Pause
button, the dishwasher will start its cycle.
CHANGING THE PROGRAM MID-CYCLE
A wash cycle can only be changed if it has been running for a short time
otherwise, the detergent may have already been released and the dishwasher may
have already drained the wash water. If this is the case, the dishwasher needs to be
reset and the detergent dispenser must be refilled. To reset the dishwasher, follow
the instructions below:
1.
Press Start/Pause button for more than 3 seconds - the program will cancel.
2.
Refill with detergent and close the door.
3.
Press the Program button to select the desired program.
4.
Press the Start/Pause button, after 10 seconds, the dishwasher will start.
3 сек
