65
ENGLISH
TECHNICAL PASSPORT
Dishwasher
Problem
Possible causes
Solution
There are rust stains
on cutlery
The affected items are not
corrosion resistant.
Avoid washing items that are not corrosion
resistant in the dishwasher.
A program
was not run after
dishwasher salt was
added. Traces of salt have
gotten into the wash
cycle.
Always run the quick wash program. without
any crockery in the dishwasher and without
selecting the Turbo function (if present), after
adding dishwasher salt.
The lid of the softer is
loose.
Check the lip. Ensure the fix is fine.
Knocking noise
in the wash cabinet
The spray arm is knocking
against an item in a
basket.
Interrupt the program, and rearrange the items
which are obstructing the spray arm.
Rattling noise
in the wash cabinet
Item of crockery are loose
in the wash cabinet.
Interrupt the program, and rearrange the items
of crockery.
Knocking noise in the
water pipes
This may be caused by
on-site installation or
the cross-section of the
piping.
This has no influence on the dishwasher
function. If in doubt, contact a qualified
plumber.
The dishes are not
clean
The dishes were not
loaded correctly.
See PART II: «Preparing And Loading Dishes».
The programme was not
powerful enough.
Select a more intensive programme.
Not enough detergent
was dispensed.
Use more detergent, or change your detergent.
Item are blocking the path
of spray arm
Rearrange the items so that the spray can
rotate freely.
The filter combination in
the base of wash cabinet
is not clean or is not
correctly fitted.
This may cause the spray
arm jets to get blocked.
Clean and/or fit the filter correctly. Clean the
spray arm jets.
