Kuppersberg FQ663 B, Technical Passport

Page: 10 / 28

10
TEchnical passporT English
gas hob
agents in order to use it for longer
period.
Â
It should be cleaned with suitable
cleaners for stains and oil.
Â
Harsh cleaning agents, stain
removers and detergents, wire wool and
sponge should not be used.
Â
Do not allow heating of the pans
as empty since the heat accumulated
at the bottom may damage the glass
surface.
Â
No cold liquid should be poured
on the glass surface or the burners
when they are hot. The glass may crack
due to thermal shock.
Clean the hob regularly after waiting
for cooling after each use in order to
keep your hob at the best manner.
Do not take out the control switches
in any manner during cleaning.
Enamel Parts
All enamel parts are used by using
water with soap and suitable detergents.
The hob should be dried thoroughly
after the process.
Pan Supports
Enamel grills may be washed in the
dishwasher.
Burner
The burners consisting of two parts
may be leaned by using detergent. 31
The burners should be dried after
cleaning process and placed their
places delicately.
In the electronic ignition models,
the electrode should be left cleaned all
the time.
In the safety valve models, the valve
should be cleaned for failsafe operation.
After completion of the process,
the burners should be placed in their
placement to their places.
The burning system should not
be used when burners are not in their
places to avoid damage to electronic
ignition system.