Kuppersberg FQ3TG, Technical Passport

Page: 6 / 52

6
Technical passporT english
gas hob
This symbol indicates that the unit
should not be disposed as domestic
waste rather it should be returned
to some electronic wastes collection
center. The disposal of the product
should be conducted as per the local
environmental legislation. You may
obtain detail information on disposal,
reuse and recycling of the product.
Â
Keep the original packaging of
the product.
Â
Carry the product in its original
packaging, and abide the markings
thereon.
Â
If the original packaging is not
available;

Take care for the impacts
which may be applied on the outer
surfaces of the product.

Place/ hold the product in
parallel to the ground during carrying
(as the upper side will be up).

Carry the pan holders not
touching each other.
Packaging
All packaging materials are
recyclable. In order to contribute
environmental protection place the
packaging material wastes to the
recycling bins.
Disposal of the old equipments
The equipments being old and
useless should not be thrown to a waste
container directly. There may be some
parts allowing re-use. Also there may
be some environmentally dangerous
materials requiring to be given to a
collection center. Therefore you should
take your unit to a collection center that
you may learn from the manufacturer/
dealer in your city and insure that the
electronic parts will be recycled.
It is important to keep the user’s
manual for it will be important in the
event of change of the user of the
device.
Before disposal or scraping of the
device it is required to prevent harmful
and negative effects on human and
environment. Otherwise it would be
incompliant waste.
5. BEFORE USING YOUR
APPLIANCE FOR THE
FIRST TIME
Â
Make sure that you remove all
packaging materials before using the
unit.
Â
When you remove the hob from
the package make sure that hob and /
or the cable is full and undamaged, and
no impact was put at the bottom of the
device, otherwise consult your seller.
Â
Any and all works on the gas
equipments and systems should be
conducted by the competent and
authorized persons.