Kuppersberg FA60RC, Technical Passport

Page: 24 / 60

24
TECHNICAL PASSPORT ENGLISH
Electric hobs
Keep the Guarantee Certificate or
the technical data sheet together with
the instructions manual throughout
the product’s service life. These con-
tain important technical information.
USE AND MAINTENANCE
Instructions for Using the Touch
Control
CONTROLS (figs. 2 and 3)
On touch button.
Off touch button.
“Increase” power touch button.
“Decrease” power touch button.
Hot plate display.
Double/triple burner selection
button (multiple burner hot plate).
Lock touch button (to lock the
othertouch buttons, except the on and
off buttons).
Hot plate double burner on display.
Lock activated display.
Stop function touch button.
Clock display.
Hot plate display.
“Decrease” time touch button.
“Increase” time touch button.
Timer/clock display.
Power display.
Hot plate burners operating display.
Clock running display.
* Only visible while running.
The touch buttons activate the con-
trols, and each is linked to a display.
You do not need to exert force on
thetouch button, you only need to touch
it with the tip of your fingertip to acti-
vate the function.
Each action is verified by a beep.
6
TECHNICAL PASSPORT ENGLISH
Electric Hob
SWITCHING
THE APPLIANCE ON
1 Press the on touch button
(1) for at least one second. The touch
control will become activated, you will
hear a beep and the displays will light
up. If any surface is hot, the display will
flash H and 0 alternately.
If you do not take any action in the
next 10 seconds the touch control will
switch off automatically.
When the touch control is activated,
you can disconnect it at any time by
touching the touch button (2), even
if it has been locked (lock function
activated). The touch button
(2)
always has priority to disconnect the
touch control.
ACTIVATING THE HOT PLATES
The hot plates will be deactivated,
with their respective power displays
(16) to 0, until a power level is selected.
If all of the hot plates are at 0, you have
10 seconds to activate one of them,
otherwise the touch control will switch
off automatically.
Use the touch buttons and
(4/3) to select a power level. If you
press the touch button (3), the hot
plate will change to 1 and the hot plate
burner display (17) will light up. Keep
pressing it to increase the power level.
You can lower the power level using the
touch button (4).
Quick switch-on at maximum power:
with the hot plate at
0
, press the touch
button (4) once. The hot plate will go
straight to 9.
If you keep eitherof these two touch
buttons or (4/3) pressed down,
they will repeat the action every half a
second, without you needing to press
them again.
SWITCHING
THE HOT PLATES OFF
Using the touch button (4) lower
the power to
0
.
The hot plate will switch off
automatically.
Quick switch-off: Regardless of the
power level, if you press touch buttons
and (4/3), the hot plate will
switch off immediately.
RESIDUAL HEAT display
The power display will display an
H when the glass surface reaches a
temperature that could cause burning.
When this risk disappears, the display
switches off (if the appliance is
disconnected), or displays a
0
(if the
appliance is still connected).
Switch the hot plate off before the
cooking time ends to make the most of
the residual heat and save on electricity.
WARNING:
If while the H is still displayed there
is a power cut and the power returns
immediately, the residual heat displays
will not light up again, even though the
cooking surfaces are still hot. Bear this
in mind.