Kuppersberg FA60RC, Technical Passport, Page: 28 / 60

28
TECHNICAL PASSPORT ENGLISH
Electric hobs
9
ENGLISH TECHNICAL PASSPORT
Electric Hob
SWITCHING THE AUTOMATIC COOK
START FUNCTION ON
(Depending on the model)
1 Set a hot plate to power
9
and
then press the touch button . The power
display will flash
9
and
A
alternately.
Lower the touch button to the desired
cooking power (for example 6). The
display will flash
6
and
A
alternately.
Example:
You want to cook at power level
6 and program a quick heat at the
beginning.
Choose power level
9
. Press the
touch button again and the power
display will flash
9
and
A
alternately.
Then press the touch button to
lower it to power level
6
. The system
keeps the hot plate at power level
9
(maximum) for 540 seconds, flashing
6
and
A
alternately, and then (after 540
seconds) it automatically lowers to
continuous cooking level
6
.
CHANGING THE POWER LEVEL
DURING AUTOMATIC COOK START
1 Use the touch button (3) to
change the power level.
When the power is increased using
the touch button (3) the time that
has passed until then is taken into
account
Example:
You have chosen power level
1
(50
seconds automatic cook start) and after
20 seconds you change it to
4
(220
seconds). The automatic cook start will
be 200 seconds (220 minus 20).
DISCONNECTING
THE AUTOMATIC COOK
START FUNCTION
After at least 10 seconds have
passed since the automatic cook start
function was activated:
1 Press the touch button (4). The
automatic cook start function will be
deactivated.
Stopwatch function
This function allows you to set a
time, after which a warning sound is
heard.
To activate the function:
1 With the touch control on and
the timer not set for any hot plate,
simultaneously press the clock touch
buttons or (13/14).
2 The clock display switches on (11),
displaying
00
, and the pilot light (19)
will flash.
3 Press the touch buttons or
(13/14) again until you set the desired
time. After a few seconds the decimal
point will start to flash, showing that
the countdown has begun.
Once the countdown is complete,
you will hear a series of beeps, which
you can stop by pressing any of the
touch buttons.
If at any time during the countdown
function all of the hot plates are at
power level
0
, the touch control will
switch off after a few seconds, but the
10
TECHNICAL PASSPORT ENGLISH
Electric Hob
stopwatch will continue to the end of
the countdown or until you stop it.
To stop the stopwatch, just set the
remaining time to 00. Firstly, to select it,
simultaneously press the touch buttons
and (13/14).
Timer function
This function makes the cooking
process easier because you do not have
to be present: the timed hot plate(s) will
switch off automatically after the set
time has lapsed.There is a separate timer
for each hot plate, which allows all of the
hot plates to be timed simultaneously.
The function is controlled using the
clock (15) increase/decrease time touch
buttons and (13/14).
Timing ONE hot plate.
To activate the timer for one hot
plate:
1 Connect the appliance and activate
one or several hot plates at a set power
level.
2 Simultaneously press the clock
touch buttons or (13/14).
3 The display comes on (11),
displaying
00
. The clock pilot light (19)
will flash.
4 Press both touch buttons
successively until the pilot light for the
hot plate that you want to time switches
on (12).
5 Use the clock or touch
buttons (13/14) to select a cooking time
between 1 and 99 minutes. The increase
touch button (14) starts at 1, and the
decrease button (15) at 30.
The timer will be set for the hot
plate. Once the countdown is complete,
the timed hot plate will switch off and
you will hear a series of beeps, which
you can stop by pressing any of the
touch buttons.
Setting the timer for more than one
hot plate.
Repeat the steps above.
Changing the programmed time.
You can change the time afterwards.
1 Simultaneously press the clock
touch buttons or (13/14).
2 Press both touch buttons
successively until the pilot light for the
hot plate that you want to time switches
on (12).
Now you can read and change the
value. If you want to cancel the timer
early, use the touch button (13) to set
it to
00
.
Remember that if during the
countdown you switch the touch control
off by pressing the off button (2) the
countdown will be cancelled!
Locking the hot plate
touch buttons
You can use the lock button (7)
to lock all of the buttons on the touch
control panel. This prevents functions
from being activated accidentally and
children from playing with the controls.
To activate or deactivate the function,
keep the touch button (7) pressed
down for around 1 second. When the
function is activated, the pilot light (9)
lights up.
Remember that when the touch
control is on, you can still switch it
off using the off button
(2) even