Kuppersberg 10162.3ETsDHbW, Technical Passport

Page: 42 / 80

42
TECHNICAL PASSPORT ENGLISH
Electric oven
3. Pull the inner glass panel from its
seat (in the lower section of the door).
Re move the inner panel (fig. D).
4. Clean the panel with warm water
with some cleaning agent added.
Carry out the same in reverse order
to reassemble the inner glass panel. Its
smooth surface shall be pointed up-
wards.
Important!
Do not force the upper strip in on
both sides of the door at the same time.
In order to correctly fit the top door
strip, first put the left end of the strip on
the door and then press the right end in
until you hear a “click”. Then press the
left end in until you hear a “click”.
Removal of the internal glass panel.
3 glass.
Removal of the internal glass panel
2 glass.
Replacement of the oven light bulb
In order to avoid the possibility of an
electric shock ensure that the appliance
is switched off before replacing the
bulb.
Â
Set all control knobs to the
position “

”/“0” and disconnect the
mains plug,
Â
unscrew and wash the lamp
cover and then wipe it dry.
Â
unscrew the light bulb from the
socket, replace the bulb with a new one
– a high temperature bulb (300°C)
with the follow ing parameters:
- voltage 230 V
- power 25 W
- thread E14.