10
11
KTE3514
2. OPERATING INSTRUCTIONS
2.1. Product description
STRUCTURE AND PARTS
1.
1 heat setting
2.
Overheating protection
3.
Digital LCD
4.
Room temperature setting
5.
Room temperature sensor
6.
Digital clock, digital week calendar
7.
Multi-operation mode: daily
program mode, weekly program
mode, free use mode
8.
Anti-frost function
Steel
housing
Out-let
LCD
screen
Power
switch
Temperature sensor
9.
Can be wall-mounted or used on wheels
INSTALLATION
With wheels
1.
Fit the feet onto the bottom of the appliance.
2.
Fasten the feet with 4 screws.
Fig. 1.
Wall-mounted
Distance between fixing points
T. EMITTER
4
5
6
7
8
L1 (mm)
242
322
402
482
562
L2 (mm)
242
322
402
482
562
Fig. 2
Fig. 3
1.
Drill holes according to the
instructions in fig. 2
2.
Place the tubes into the holes of
the wall.
3.
Set up grips with screws (Fig. 4)
4.
Place the T. Emitter on the upper
grips
5.
Place the down grips to maintain
the appliance against the wall.
6.
Screw grips down with screws.
WALL
TUBES
SCREWS GRIPS
GRIPS
Fig. 4
CAUTION:
Before starting the appliance, make sure it’s correctly
wall-mounted. If it’s not parallel to the floor, technical problems can
occur.
Control panel and LCD screen
Control panel:
There is a total of 5 buttons on the control panel as follows:
Power standby switch
Date and time settings; Timer settings; Running mode
Running mode; Set program;
Increase
Decrease
The screen has a backlight which will automatically turn itself of after
1 minute if no buttons are pressed. It will light up again if you press
any button.
The unit has an auto button lock function. The buttons will be locked
(
) after 1 minute if you don’t press any buttons.
To remove the lock: press
and
at same time.
Screen:
1.
Clock
2.
Date
3.
Program name/ number
4.
Hour of the day
5.
Comfort
6.
Economy
7.
Anti-frost
8.
Standby
9.
Buttons locked
10.
Heating symbol
11.
Program setting
12.
Timer
13.
Day settings
14.
Target temperature
EN
electric radiator 900W
