Installation Instruction DF PROFI PCIe
5 / 7
3 Installation on the Board
The DF PROFINET IO PCI is a plug and play compatible board for 5 V
and 3.3 V 32-Bit PCI-Slots. The configuration entirely takes place by
means of the delivered software or the BIOS of your PC respectively.
Thus, no jumpers or DIP-switch adjustments are necessary.
To mount the board, please proceed as follows:
◦ Switch off your PC and unplug the mains plug.
◦ Remove the screws of the PC cage and lift off the cover. If
necessary, please see also the operating instructions of your PC.
◦ Select a free PCI slot.
◦ Remove the slot cover and plug the DF board into the determined
slot. Pay attention to a proper adjustment of the board in the
guidance (avoid canting!).
◦ Screw down the board.
◦ Fix the cover again and screw it down.
1
2
Illustration 1:
DF PROFINET PCIe-Board
1
LAN socket for controller functionality
2
LAN socket for device functionality
Installation on the Board
