40
EN
EN
easyTab
Connecting the PushBuddy
®
to easyTab will be possible from version 2.1.
Connecting PushBuddy
®
with a base unit
Remove the handle from the PushBuddy
®
. To do this, press the button from bottom to top
and pull the handle upwards.
Remove the extensions one after the other. Press the button from bottom to top and pull the
extension upwards.
Attach the handle to the PushBuddy
®
. Make sure that the recess on the handle fi ts exactly
into the bulge. The pin must snap into the handle.
Profi 3+ or proTab
Click on the connection symbol at the
bottom left of the screen and select the
desired PushBuddy
®
. Click on „Connect“.
Once the connection is established, the
beep will no longer be audible.
Removing an extension
