53
EN
EN
53
END OF OPERATION
Shut down the device via the software. Close the cover to protect the monitor. If the device is
not put back into operation in a short time, the battery has to be removed.
TROUBLESHOOTING
If errors occur, you can use the following list to narrow down possible causes and, in most
cases, solve the problem yourself.
MALFUNCTION
SOLUTION(S)
No camera image
Check K-50 HD plug connection
Log the camera off and on again via the software
Check power supply and replace battery if nec-
essary
Device does not shut down imme-
diately
Windows-Updates are running. Ensure power
supply and wait until the device shuts down.
Device does not start up
Check power supply and insert or replace battery
if necessary.
Camera controls
Brightness (1):
Tap on the large symbol to increase and the small symbol to decrease the
brightness. (K-50 HD, K-60 HD)
Zoom (2):
Tap on the big symbol to zoom in and on the small symbol to zoom out.
Localization (3):
The localization is switched off when the device is started. To turn it on, tap
on Locate. The button is mint green when locating is switched on. (K-50 HD, K-60 HD)
1
2
3
