background image

All indicators twinkle 
simultaneously 

1. Water tray is blocked

by ice cube

2. The motor is stuck, or

the motor falls off, or
the motor is damaged

3. The micro switch was

destroyed

Unplug the power to take out the ice 
which blocking the tray, then plug the 
power and press the ON/OFF button, 
the machine will restart 3mins later. 

The machine has been 
working, but the water 
has been warming 

Solenoid broke down 

Replace the solenoid valve 

When the ice is full, the 
machine does not display 
the ICE FULL Icon 

Ice full sensor damaged 
Sunlight interference 

1. Replace the ice full sensor
2. Making ice indoor

1. If the power cord is damaged; it must be replaced by the manufacturer, its service agent or a

similarly qualified person in order to avoid a hazard.

2. Fill with potable water or beverage only.

3. It is normal for the compressor and condenser surface to reach temperatures between 70°C and

90°C during operation and surrounding areas may be very hot.

4. Due to fast freezing, ice cubes may appear “Cloudy”.    This is air trapped in the water and will not

affect quality or taste of ice.

5. This appliance is not intended for use by persons (including children) with reduced physical,

sensory or mental capabilities or lack of experience and knowledge unless they have been given

supervision or instruction concerning use of the appliance by a person responsible for their safety.

6. Children should be supervised to ensure that they do not play with the appliance.

7. Do not immerse in water.

Correct Disposal of this product 

This  marking  indicates  that  this  product  should  not  be  disposed  with  other 

household  wastes  throughout  the  EU.  To  prevent  possible  harm  to  the 

environment  or  human  health  from  uncontrolled  waste  disposal,  recycle  it 

responsibly to promote the sustainable reuse of material resources. To return your 

used device, please use the return and collection systems or contact the retailer 

where the product was purchased. They can take this product for environmental 

safe recycling. 

8

Summary of Contents for ICM1232









Reviews: