FEATURE
Quick ice making
Prompt when the ice is full and water is insufficient
Bullet ice
9 pcs ice can be made in eight minutes
Cleaning function
1.
During transportation, do not tilt the machine more than 45 degrees, do not reverse the machine.
This may damage the compressor and the sealing system.
2.
Remove all packing materials, check the machine carefully and make sure that the machine, power
cord and plug are normal.
3.
The machine should be on a level surface. To ensure sufficient ventilation, the distance of the back
of ice maker to the wall should be at least 150 mm, it should be away from the oven, radiator or other
heat source.
4.
Before using the machine for the first time, place the machine and leave the transparent cover open
for at least two hours.
5.
Make sure that the home voltage is consistent with the voltage indicated by the machine.
6.
Distilled water is not allowed. Mineral water is recommended.
CONTROL PANEL OPERATION
ON/OFF: ON-OFF switch button
Clean: Cleaning function button
ICE FULL: Ice full alarm
ADD WATER:
Water shortage alarm
ICE MAKING: Ice making
1).
Plug in the power, the "ICE MAKING " indicator flashes, and the machine will start the deicing
function. Press the ON/OFF button, the "ICE MAKING" indicator light is always on and then the ice
block will be made automatically. After the ice making is completed, the deicing will be carried out, and
then the ice shoveling function will be entered, and so on.
5
