4
Step 9
Pull out the grease drawers located on both sides
of the grill. Remove the plastic wrap securing the
foil trays to the drawer. Remove one of the two
trays in each of the drawers and save for future
use. Re-insert the drawer into the grill. They will
click into place and are now ready to collect drip-
pings.
Step 10
From inside the grill, insert the quick grill zone
linkage through the hole on your right and
through the hole in the side shelf. Attach the knob
to the end of the linkage.
Leg Model Assembly Instruc-
tions
(For build in model assembly, see instructions
located later in this section)
Step 1
Lay the grill body on it’s back taking care to pro-
tect the fi nish. You may choose to lay the grill on
the pallet for a slightly elevated working surface.
Do not set the grill body on it’s bottom at any time
(this could damage the combustion fan).
Step 2
Install the rear legs to the grill body using the
1/4-20 hex screws, 1/4-20 nuts, and 1/4 washers.
Leave the bolts loose until step 4.
Step 3
Install the lower shelf to the rear legs using the
1/4-20 button head screws, 1/4-20 nuts, and 1/4
washers. Tighten the nuts from behind with a
7/16 wrench while securing bolts with the 5/32
hex key tool provided.
Step 4
Install the front legs to the grill body using the
1/4-20 hex screws, 1/4-20 nuts, and 1/4 washers.
Tighten all 4 legs with a 7/16 wrench. Attach the
lower shelf to the front legs using 1/4-20 but-
ton head screws, 1/4-20 nuts, and 1/4 washers.
Tighten the nuts from behind with a 7/16 wrench
while securing bolts with the 5/32 hex key tool
provided.
Step 5
Install the 2 locking casters on the front legs and
the two non-locking casters on the rear legs using
1/2-13 nuts and 1/2 star washers. Tighten with a
3/4 wrench.
Step 6
With help from another person, set upright and
fi nish attaching the lower shelf to the rear legs us-
ing the remaining 1/4-20 button head screws.
Step 7
Peel the plastic fi lm back from around the mount-
ing holes of the side shelves. Install the side