Kuka KR 20-3 Specification Download Page 2 | Manualshive

Page: 2 / 81

Kuka KR 20-3 Specification Download Page 2

KR 20-3

Issued: 22.04.2016 Version: Spez KR 20-3 V2

© Copyright 2016

KUKA Roboter GmbH
Zugspitzstraße 140
D-86165 Augsburg
Germany

This documentation or excerpts therefrom may not be reproduced or disclosed to third parties without
the express permission of KUKA Roboter GmbH.

Other functions not described in this documentation may be operable in the controller. The user has
no claims to these functions, however, in the case of a replacement or service work.

We have checked the content of this documentation for conformity with the hardware and software
described. Nevertheless, discrepancies cannot be precluded, for which reason we are not able to
guarantee total conformity. The information in this documentation is checked on a regular basis, how-
ever, and necessary corrections will be incorporated in the subsequent edition.

Subject to technical alterations without an effect on the function.

Translation of the original documentation

KIM-PS5-DOC

Publication:

Pub Spez KR 20-3 (PDF) en

Book structure:

Spez KR 20-3 V2.1

Version:

Spez KR 20-3 V2

«
1
2
3
4
...
»

Summary of Contents for KR 20-3


















































































Reviews:

No comments