KUHN MAXIMA 2 M Operator'S Manual Download Page 55

Page: 55 / 220

Instructions for work

Precision Seed Drills

MAXIMA 2 M

2. Adjustments in working position



Adjusting the seeding unit ground
pressure

The seeding unit ground pressure is modified by

changing the position of springs (1).

Coupling device (a):

By moving one spring (1) rearwards, the seeding unit

ground pressure is increased by 20 kg (44 lb).

Coupling device (b):

By moving 2 springs (1) rearwards, the seeding unit

ground pressure is increased by 40 kg (88 lb).

When the 2 springs (1) are positioned in
configuration (b), check that the frame is
sufficiently ballasted.

The drive wheels must not slip. If necessary
ballast the frame.

Summary of Contents for MAXIMA 2 M





























































































































































































































Search results

Summary of Contents for MAXIMA 2 M

Reviews:

Related manuals for MAXIMA 2 M

Brands by name

Popular brands

KUHN MAXIMA 2 M, Operator'S Manual

Search results

Summary of Contents for MAXIMA 2 M

Reviews:

Related manuals for MAXIMA 2 M

Brands by name

Popular brands