KUHN MAXIMA 2 M, Operator'S Manual

Page: 121 / 220

Optional equipment
Precision Seed Drills
MAXIMA 2 M
119
For seeding conditions requiring a heavier tamping, it is
possible to modify the pressure spring position:
- Position adjustment lever (1) frontwards to reduce the
spring tension as much as possible.
- Remove one of the press wheels (2).
- Remove bolt (3) and nut (4).
- Remove spring (1).
- Raise the roller (2).
- Remove bolt (3) and nut (4).
- Position screw (3) in one of the holes (5) to increase
or decrease the roller tamping capacity.
- Reinstall spring (1).
- Reinstall bolt (3) and nut (4).
- Reinstall the press wheel (2) making sure to keep a
spacer inside.
- Adjust the tamping pressure using lever (1).
Adjust all seeding units to the same settings.