Safety
Tedder-rake combination
HAYBOB 300
21
Operation
First use only after instruction
It is not allowed to operate the machine until distribution company employees, company representatives or
manufacturer's employees have given instruction. If initial operation is performed without instruction, damage to
the machine can be caused by operating errors and accidents can occur.
Ensure that the machine is in perfect technical condition
Do not operate the machine unless it is in perfect condition. Check all important components and (let) replace
any defective component before start operating. Defective parts can cause damage to materials and injuries to
persons.
Do not remove protective equipment
The protective equipment should not be removed or by-passed. Check all protective equipment before
operation. Unprotected machine parts can cause serious or fatal injuries.
Carrying people and objects on the machine is prohibited
Neither persons nor objects are allowed to be transported at the machine at any time. Only parts stored in their
dedicated storage locations are alllowed to be transported at the machine. Riding on the machine is hazardous
and strictly prohibited.
Make sure the direct surrounding is clear
Check the surrounding of the machine before starting and continually during operation. Make sure that the
operator has an adequate view of the work area. Only start working if the direct surrounding is cleared from any
persons and objects to avoid serious or fatal injuries.
Maximum hydraulic oil pressure 210 bar (3045 psi)
The prescribed maximum hydraulic oil pressure of 210 bar (3045 psi) may never be exceeded.
A higher hydraulic oil pressure can damage the machine.
Tighten all bolts and nuts
Tighten all bolts and nuts regularly. Bolts and nuts may come loose by using the machine. Loose or missing bolts
and nuts can cause damages to the machine or accidents.
