KUHN GMD883, Operators Manual And Installation Manual, Page: 61 / 88

Instructions for work
Disc mower
GMD883
59
On slopes
During work, the machine frame can be offset laterally
to avoid strips of uncut crop when turning or on slopes.
During work on slopes, the mowing unit overlap can be
insufficient due to the tractor rear axle side drift.
To adjust the overlap.
- Offset the rear machine:
• Shift offset cylinder double acting valve.
- Position main frame in line with the tractor on even
field.
Groundspeed
The frame must be offset uphill.
The offset increases the overlap up to D = 270
mm (10’6’’).
Adapt the forward speed to the working
conditions.