KUHN GMD883, Operators Manual And Installation Manual, Page: 60 / 88

Disc mower
58
GMD883
Instructions for work
Lateral offset
During work, the machine frame can be offset laterally to
avoid strips of uncut crop when turning or on slopes.
When turning:
When turning at work, the overlap between the mowing
units can be insufficient.
To adjust the overlap.
- Offset the rear machine:
• Shift offset cylinder double acting valve.
- Position the central frame in line with the tractor when
coming out of the curb.
The frame must be offset towards the outer curb
side.
The offset increases the overlap up to
D = 270 mm (10’6’’).