KUHN GMD800GII-FF, Operator'S Manual

Page: 57 / 88

Maintenance and storage
Disc mower
GMD800GII-FF
55
„ Checking cutterbar oil level
Regularly check the cutterbar oil level:
• Place cutter bar in vertical position.
• Remove filler plug (1) and its washer.
• Check the oil level.
• Top up if necessary.
• Clean and reinstall filler plug (1) and its
washer. Replace if necessary.
• The oil must reach the lower edge of the filling hole.
• Top up if necessary.
• Clean and reinstall filler plug (1) and its
washer. Replace if necessary.
Before checking that the discs rotate freely by hand:
If it is found that the transmission case is very hot
to touch by hand, there is no cause of alarm
provided:
- Lubrication recommendations have been
respected.
- Discs can be rotated freely by hand when
the machine is hot.
Before carrying out any maintenance or
repairs on the machine, switch off the tractor
engine, remove ignition key, wait until all
moving parts have come to a standstill and
apply park brake.