KUHN GMD800GII-FF, Operator'S Manual

Page: 31 / 88

Putting into service
Disc mower
GMD800GII-FF
29
If measure A is comprised between 2.10 m (6’11")
and 2.25 m (7’04"):
- Place lower links in position b:
Adjust machine lower hitch pin position:
- Loosen the 8 screws (3).
- Centre hitch pin (1) with regards to the mounting plate.
- Tighten 4 hitch pin screws (1).
• Torque : 12 daN m (89 lbf ft).
- Position hitch pin (2) at measure (X = 825 mm (2’8").
- Tighten 4 hitch pin screws (2).
• Torque : 12 daN m (89 lbf ft).
If measure A is comprised between 2.25 m (7’04")
and 2.40 m (7’10"):
- Place lower links in position c:
Adjust machine lower hitch pin position:
- Loosen the 8 screws (3).
- Position hitch pin (2) at measure G = 10 mm (0.4").
- Tighten 4 hitch pin screws (2).
• Torque : 12 daN m (89 lbf ft).
- Position hitch pin (1) at measure (X = 825 mm (2’8").
- Tighten 4 hitch pin screws (1).
Torque : 12 daN m (89 lbf ft).
X
X
G