KUHN GMD602 GII, Operator'S Manual

Page: 56 / 64

Disc mower
54
GMD602 GII
Maintenance and storage
4. Storage
„
At the end of each season
- Clean the machine thoroughly.
- Drain all gearboxes and cutterbar and refill with new
oil (see "Lubrication" chapter).
- Touch up paint if necessary.
- Put the machine under cover in a dry place.
- Inspect and replace worn knives and bolts (See
section "Inspection of knives and securing elements").
- Depressurize all hydraulic functions.
„
At the start of each season
- Read through the operator's manual again.
- Pressurize the hydraulic circuit before activating any
other hydraulic function of the machine.
- Check the condition of the friction slip clutch (see
"Secondary pto shaft" chapter).
- Inspect and replace worn knives and bolts (see
"cutterbar" chapter).
- Check that all nuts and bolts are sufficiently tightened.
- Make sure that all protection devices are in place and
good condition.