- 33 -
LOWER LINK PINS - CAT. 2
(photo 52)
When
GMD 55 / 66 SELECT
are attached to tractors
with category 2 linkages only, the two lower link pins
can be replaced by two category 2 link pins.
Code no 562 040 00.
HYDRAULIC CYLINDER
The mechanical lift of
GMD 44 SELECT
multidisc
mowers can be converted to hydraulic lift by fitting
hydraulic cylinder assembly (no. 101 6090) (photo
53).
HYDRAULIC ADAPTATORS
(photo 54)
For fitting to different types of hydraulic connectors,
three adaptators are available :
M 16 x 1,5 / 1/2" GAZ-CON 22 (no 823 012 05)
1/2" NPT-24
(no 823 012 06)
3/4" UNF-JIC
(no 823 019 02)
SPECIAL PTO SHAFT
(photo 55)
(For
GMD 44 / 55 / 66 SELECT
)
A reinforced PTO shaft including a free-wheel (no
4500 560) is available for the following cases :
- where a standard PTO shaft is too short,
- when the tractor is equipped with a hydraulic PTO,
- when the angle of the PTO shaft is in excess of 25°
when working.
Summary of Contents for GMD 55
Page 1: ...ASSEMBLY OPERATOR S MANUAL GMD 44 55 66 SELECT MULTIDISC MOWER N 95011 A GB 07 98...
Page 12: ...10...
Page 42: ...N O T E S...
