GA6501
46
8. - Instructions for work
KN255AGB F
Gyrorake
8.3.1 Putting the machine in headland turn
position
The machine is placed from working position into
headland turn position by means of the rotor arm lift
cylinders controled as from a tractor's hydraulic
outlet.
- Use the headland turn position when crossing over
an already formed windrow.
From the working position:
- Activate tractor hydraulic double acting valve until
locking studs of rotor arms (1) are in contact with
stops (2).
The machine is in headland turn position.
8.3.2 Drive speed
The machine can work at a speed of up to
15 km/h (9 mph) in very good working conditions.
Groundspeed must be adapted to the encountered
working conditions.
2
1
1
2
40
