KUHN GA 300 GT, Assembly & Operators Manual

Page: 16 / 28

- 14 -
WORKING POSITION AND ADJUSTMENTS
When working, the tractor linkage must always be stabilized from both sideways and vertical movement.
The height of the GA 300 GT is correct when the tines brush the ground at the front and all tine arms are approximately
horizontal.
To adjust height, proceed as follows :
- Take the machine out of its transport position by unlocking the wheel axle adjustment plate (S) using lever (L)
(photo 8).
- Lower the machine so that the tines just brush the ground.
- Lock the wheel axle adjustment plate (S) into position using lever (L) into the nearest slot.
- To finish the rotor adjustment, use crank handle (M) (photo 8).