KUHN GA 300 GT, Assembly & Operators Manual

Page: 14 / 28

- 12 -
Fitting the swath screen
(photo 6)
Mount the support (S) of the swath screen inside the
“U” section (E) in one of the 4 fixing holes and secure
with pin (C).
Mount the swath screen (H) to the support (S) in one
of the 3 positions and secure with 2 bolts (J) (screw M8
x 55 and self-locking nut). Do not forget to put the bar
(Z) between the swath screen and bolts (J).
ATTACHMENT
I) Fitting to tractor (photo 7)
The ideal hitch point for the GA 300 GT is on a multi-holed drawbar attached to the tractor lower link arms which
should be set at a height of 40 cm (16") from the ground and locked in place.
If the PTO shaft is fitted with a C.V. joint, machine should be attached to the tractor drawbar for optimal turning ability.