KUHN BK230, Operator'S Manual

Page: 52 / 72

Shredders
50
BK
Optional equipment
5. Lengthways transport (BK320)
Kit no. 1556828 (BK320)
Fitting the front wheel
- Position support (1).
- Install 6 bolts (2).
- Tighten screws (2).
• Torque: 9 daNm (67 lbf ft).
- Position wheel arm (3) on pivot pin(4).
- Slide washer (5) on pivot pin (4).
- Insert bolt and nut (6) in pivot pin (4).
- Tighten screw (6).
• Torque: 5 daNm (37 lbf ft).
- Insert pivot pin (7) in hole corresponding to the
working position (A).
- Lock pin using lynch pin (8).
Fitting the rear right wheel
- Remove pin (1).
- Remove pin (P).
- Remove wheel arm (2).
- Remove the 4 nuts (3).
- Remove arm support (4).
- Fit support (5).
- Insert the 4 nuts (3).
- Tighten nuts (3).
• Torque: 21 daNm (155 lbf ft).
- Fit arm support (6) on pivot pin (7).
- Slide washer (8) on pivot pin (7).
- Insert bolt and nut (9) in pivot pin (7).
- Tighten screw (9).
• Torque: 5 daNm (37 lbf ft).
- Insert pivot pin (10) in hole corresponding to the
working position (A).
- Lock pin using lynch pin (11).
- Reinstall wheel arm (2).
- Reinstall and tighten pivot pin (P).
• Torque: 11.5 daNm (85 lbf ft).
- Reinstall and lock pin (1).