KUHN ALTOR 7560, Operator'S Manual

Page: 67 / 96

Instructions for work
Silo unloader - Straw spreader - Mixer - Distributor
ALTOR 7560
65
Operating tips
- For uniform straw blowing, the bale must be
permanently in contact with the bale separators
although without being excessively blocked with the
hook..
- Lift the back of the machine slightly to avoid the bale
being thrown to the back of the beater bar.
- During straw blowing, adjust the height of the body in
order to:
• keep round bales up against the beater bar when
the product requires little power.
• Facilitate rotation of the round bale against the bale
separators when the product is more resistant.
- To improve product feed into the blower, up to 3 hooks
can be mounted on the beater bar in place of the
sections.
Keep an angle of 120° between the hooks.
Never distribute hay with the hooks mounted on
the bale separators.
You are strongly recommended to spread straw
after distributing feed to the animals: this helps
clean and dry the machine (straw absorbs silage
acids) and thereby limit corrosion of the machine
by acid attack..
To spread straw in stalls, use a turbine rotation
speed of 270 min
-1
.