The 3D printer now is in a safe state for troubleshooting.
For repairing any defects of the electronic equipment or major mechanical damages shut down
the 3D printer completely:
Open the Print screen.
Shut down the 3D printer by tapping the [Shutdown] button and switching off the main switch
(<0> position) after the shutdown procedure has been finished.
NOTICE
Before restarting or reactivating the 3D printer:
Make sure that the axes are in no collision position.
Make sure that the reason for the emergency stop has been detected and fixed, before
resuming production.
After troubleshooting or if the reason for the emergency stop was minor and you want to continue
production:
Remove the print bed from the build chamber and replace or clean it before further use.
the 3D printer (if necessary).
Open the Print screen.
Switch on the build chamber. The 3D printer will run the homing routine.
You can now resume normal operation.
[Configuration] screen
The Configuration menu is a new feature that
enables you to preselect material-specific
temperature profiles for each extruder and, in
combination, the print bed/build chamber. The
latter was developed to make preheating and
leveling more precise with regard to different
material settings. The according profiles can be
set up at the
.
No. Description
Content/Function
1
Left extruder
profile selection
The currently selected
profile is displayed.
Tap [Select] to open the
list of available filament
profiles or [Clear] to delete
the active profile.
2
Right extruder
profile selection
GUI Configuration screen with temperature
profile selection.
