manualshive.com logo in svg

Kugelmann Maschinenbau KS 1200, Operating Instructions Manual

Share
Download
Kugelmann Maschinenbau KS 1200 Operating Instructions Manual Download Page 61

//

 

ORIGINAL OPERATING INSTRUCTIONS

 

Options

27.06.2018

61/79

Warning

Bursting of high-pressure hoses.
Risk of serious injury.

•

A damaged high-pressure hose must be replaced immediately.

Warning

Flying debris.
Risk of serious injury.

•

Always wear appropriate protective clothing and protective goggles to protect
yourself from splashing water or waste!

Warning

Danger of high-pressure jets passing through the skin.
Risk of serious injury or property damage.

•

Do not direct the high-pressure jet at yourself, other persons, animals or active
electrical equipment!

Warning

Damaged hose.
Risk of serious injury.

•

A damaged high-pressure hose must be replaced immediately!

Caution

Injuries caused by water jets.
Risk of injury.

•

The lever of the manual spray gun must not be clamped during operation!

•

2-hand operation must be guaranteed!

Summary of Contents for KS 1200
















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands